DENON AVR-1404 / 484 BSTOCK AUTHORUIZE DEALER W WTY
[DEN9-AVR484]

STOP
WARNING
BEFORE YOU BUY ANY DENON ONLINE
CHECK DENON''S WEBSITE WARNINGS.
DO NOT BUY FROM ANY DEALER WHO IS NOT LISTED ON DENON''S SITE AS AN AUTHORIZED DEALER.

This unit has been quality refurbished by DENON to new condition. The item comes in its manufacturer’s packaging with all accessories and documentation Denon provides.
DENON certifies that this AVR-484 unit operates exactly as a BRAND NEW unit.

WE ''DAKMART'' offer an exclusive 1 year warranty on these items, unlike others who only offer the standard 90 day warranty.

BE VERY CAREFUL OUT THERE... If you do not buy an AVR-484 from an authorized DENON Dealer, DENON WILL NOT honor the warranty and you will not receive any updates, upgrades or support. DENON''S technicians are among the best in the business... DO NOT give that up!!! If you buy an AVR-484 from a dealer who is not authorized, you are taking a risk that the serial # may have been tampered with or removed...

GO NOW TO

http://www.Dakmart.com/website/DenonHome.htm

SCROLL TO THE BOTTOM...
THERE WE ARE
DAKMART.COM
AUTHORIZED DEALER AND EBAY RESELLER



The Denon AVR-484’s chassis that supports the large transformer has been designed to absorb vibration, and the transformer is housed inside a highly rigid frame to secure it more solidly to the chassis. In addition, a cushioning material has been placed around the core of the transformer to minimize interference on the signal and enable more faithful reproduction of the original sound. DENON''s higher-end models incorporate these low-noise designs, such as the use of short rings.

The Denon AVR-484’s Twin Drive Rectifier design uses two rectifying diodes in parallel to bring out the maximum potential of the large transformer. Since the rectifiers power the large block capacitors at low impedance, they are able to supply ample current to reproduce deep basses as well as sudden bursts of sound from percussion or other musical instruments.

They have been placed in a design that ensures mostly uniform temperatures throughout the heat-sink so that the output transistors for all channels can be driven under uniform conditions. This in turn ensures that all channels respond with equal performance to the demands of the audio signals.

The Denon AVR-484 offers Fully Discrete, Equal Power Five Amplifier Channels, 110 Watts Each. Front 110 W + 110 W (6 ohms, 1 kHz, 0.7 % THD). Center 110 W (6 ohms, 1 kHz, 0.7 % THD). Surround 110 W + 110 W (6 ohms, 1 kHz, 0.7 % THD). For optimum Dolby Digital and DTS reproduction, the AVR-484 features high quality, wideband audio amplification, providing 110 watts power output for each of the five main channels. A large capacity power supply includes a high current power transformer along with discrete power output devices on all five amplifier channels for highest dynamic range and superb reproduction clarity.

The power amp circuits of the Denon AVR-484 have been meticulously designed to reproduce the exceptionally high sound quality with wide frequency response from 10 Hz to 100 kHz.

The sound from movie sources recorded in Dolby Digital, DTS or other formats emphasizes high-frequency range due to a theater’s front speakers being placed behind the movie screen. If this sound is reproduced in the home theater without correction, the high-frequency range is too strong. The Denon AVR-484 features a Cinema Equalizer to correct these high-frequency components so that the sound is clearer and easier to listen to. (For Dolby Digital, Dolby Pro Logic II, and DTS surround modes)

The Denon AVR-484 includes the Personal Memory Plus function that automatically remembers the surround mode you last used for each program source, so that you do not need to select the mode again for that program.

As with all of DENON’s high-grade A/V receiver, the AVR-484 lets you adjust delay times and other parameters so that you can customize the performance of the AVR-484 to suit your own home theater and enhance operating ease. The adjustments are easy to make via a dialog format on the fluorescent display on the front panel. These customized features are then stored, for each source input and surround mode, in Personal Memory Plus so constant readjustments are not required.

General specs for the Denon AVR-484 include:

Dolby Digital, Dolby Pro Logic II and DTS A/V Receiver
- Dolby Pro Logic II, with Cinema and Music Modes
- Dolby Digital and DTS decoding
- 24 bit DSP processor
- 5 equal power amplifier channels
- 110 watts per channel into 6 ohms, 1kHz, <.7%THD
- Discrete power amplifier stage
- 5 Channel Stereo
- Personal Memory Plus
- Virtual Surround (for use with 2 speakers)
- Front left and right bass and treble control
- 24 bit, 96 kHz DACs
- 24 bit, 96 kHz digital interface receiver
- 24 bit, 96 kHz stereo PCM digital playback
- Speaker A/B (front) selector
- Front Panel A/V inputs with cover
- 6 Channel External Input (for DVD-Audio) with wideband (100 kHz) frequency response
- Addressable digital inputs, 1 optical, 1 coaxial
- S-Video and Composite video switching
- Banana plug compatible speaker terminals all channels
- Subwoofer Pre-amp output
- Glow-Key pre-programmed remote features codes from other manufacturers; Glow in the dark main function keys
- Dimensions: 17.1''w x 5.8''h x 16.4''d